How to Replace a Kia Sportage Replacement Key
For a variety of Kia models keys, there is a built-in keyless entry system. The key functions like the remote control and can be exchanged by a Kia dealer.
Key fobs can stop working due to various reasons, such as batteries that are dead, worn buttons water damage, signal interference and a faulty receiver module. Here are some guidelines on how to get your Kia Sportage replacement key back to working.
How do you replace the remote key or the smart key?
It doesn't matter if your Kia is equipped with an intelligent key, remote key, push to start key or a regular non-transponder steel key the battery in these keys will eventually need replacing. This is especially relevant if your vehicle shows a message that states the remote or smart keys are in poor condition.
This is a relatively easy process. To replace the battery of the keyfob, remove your mechanical key from the slot at the back of the fob. Then, push the cover open. A small screw will be found inside the key fob that holds the battery in its place. Using a small screwdriver, loosen the screw and remove the battery that was in place. Then, insert the new and close the slit in the key fob.
Test the key fob by pressing the lock and unlock buttons. It's good If the doors lock and unlock as expected. You can now utilize the hands-free feature to lock and unlock your Kia when your fingers get cold or you need to go on errands around Brandon.
Note: kia rio replacement key TheKeyLab (transponder chip or smart keys) may require their programming completed. This requires a programing machine that is only available to the automotive locksmith or dealer. Other keys (non-transponder metal keys) don't require programming. If your key has to be reprogrammed, you will need to be aware of the key code printed on the key code tag and then record it in a safe location.
How do you replace the battery?
If your Kia key fob is not responding when you press the lock or unlock button on the fob, this is a signal that the battery should be replaced. A battery that is not functioning properly can cause other issues, like the check engine light turning on or the engine not running properly. Fortunately, replacing the key fob battery is a fairly simple DIY project that requires just a few tools.
Before beginning the process be sure that your vehicle is off and all doors are closed. Find the small metal or a plastic piece near the bottom of the key fob. Move it until the metal key falls out. This key can be put into the driver door handle to unlock your car.
To replace the key fob's battery, take off the cover at the rear and use a pry bar tool to loosen the latch holding the black negative battery cable. Remove the old battery and then orient the new battery so that the "+" positive side faces your face and the "negative" negative side is facing towards the fob's metal electrical contacts. Avoid using excessive force when pushing the new CR2032 into position to avoid damaging or breaking the metal contacts.
After the new battery has been installed and the key fob is turned on, turn it off and back on in the ignition for a few times until the door locks. You can then test the Kia's Key fob to ensure it's functioning properly.
How do you replace a smart key
Depending on the model of the Kia Sportage, you may have an ordinary key fob or a smart key. The difference between them is that the smart key has tiny mechanical key blade that is hidden inside, while the standard key fob does not. Both types of key fobs have a battery inside them that will eventually have to be replaced. Fortunately, this is an easy task that only takes about two minutes.
Before you start it is essential to ensure that you are on a flat surface with good lighting and that your Kia is not on. Be aware that there are tiny parts inside the fob which could fall out if not cautious.
The release button for the small size is located on the lower backside. It could be an oval silver button or a rectangular slot. You can open the key fob by pressing the button.
Once the key fob is opened, remove the old battery. The new battery is a CR-2032 that can be bought online or from your local auto parts store. After you're done, your key fob should allow you to lock the vehicle, unlock it, and then start your vehicle even if it's not running.
How to replace the mechanical key
The Kia keyfob is a great convenience, allowing us to lock or unlock our car with just pressing a button. Like any other device, the Kia key fob might have issues. Luckily, there are ways to troubleshoot these issues and keep our key fobs in good working order for the long run.
One of the most frequent problems is a weak or dead battery. This could cause the fob to stop working entirely or to work intermittently. If this is what you are experiencing you should replace the battery an entirely new battery.
If this does not solve the issue, use an ordinary screwdriver with a flat head to wedge the fob's plastic casing open. Be careful not to damage any internal components or scratch the plastic. Once the battery is removed and replaced, you can replace it with a brand new battery.
Close and open the door using the mechanical key. (Every Kia fob comes with a spare mechanical key that fits into the slot). Test the key fob to confirm it's working properly. Contact a dealer locksmith to fix the issue when the fob still is not working. To avoid a lockout in the future make sure you get an emergency key that will be able to work with all door and trunk cylinders.